1.Application range and characteristics:
2BE series water ring vacuum pumps and compressors are the high efficiency energy saving products of our company. It is produced on the foundation of scientific research achievements and production experience for many years, and combined with the advanced technology of import products. It is usually used to pump the gases without small solid granules, and gases that doesn't dissolve in water, and noncorrosive gases, so as to form the vacuum and pressure in the closed container. By changing the structural material, it is also available in aspirating corrosive gas or using the corrosive liquid as the operating liquid. So it is used extensively in many trades such as papermaking, chemical industry, petrol chemical industry, light industry, pharmacy, foodstuff, metallurgy and construction materials, stone implement, coal washing, ore dressing and chemical fertilizer etc..
This series pump is single stage and single acting. It is simply structured and convenient to maintain. It is energy saving and can run stably.Compared with the widely used SK, 2SK and SZ series water ring vacuum pump in China, the 2BE series pump possesses the notable merits such as the high vacuum degree and the low power consumption etc.. And it is the ideal replacement product of SK, 2SK and SZ series water ring type vacuum pump.
2BE series water ring vacuum pump assembles with gas-water seperator and is easy to install, operate and maintain.
2BVC series Water Ring Vacuum Pumps And Compressors
2BVC Series Water Ring Vacuum Pump and compressor is mainly used for sucking gases and water vapour. The ultimate suction pressure can reach 33mbar (97% vacuum). When working under suction pressure below 80mbar long time, it should be connected with cavitation resistant pipe. The suction pressure can reach 10mbar if assembling with an air ejector. As a compressor, the ultimate pressure can reach 0.26MPa.
Characteristics: 1. Motor:Inline,direct connection with the pump, saving space and easy to install.
2. Mechanical seal: No leakage and easy to maintain.
3. Firm performance and low noise (can be as low as 62 db(A))
4. Bronze impeller improves the corrosion resistance; Stainless steel vacuum pump can meet higher requirements for corrosion resistance.
5. Special flexible outlet design ensures no over-compressing and firm performance under design conditions
2BVC series Water Ring Vacuum Pumps And Compressors
2BVC Series Water Ring Vacuum Pump and compressor is mainly used for sucking gases and water vapour. The ultimate suction pressure can reach 33mbar (97% vacuum). When working under suction pressure below 80mbar long time, it should be connected with cavitation resistant pipe. The suction pressure can reach 10mbar if assembling with an air ejector. As a compressor, the ultimate pressure can reach 0.26MPa.
Characteristics: 1. Motor:Inline,direct connection with the pump, saving space and easy to install.
2. Mechanical seal: No leakage and easy to maintain.
3. Firm performance and low noise (can be as low as 62 db(A))
4. Bronze impeller improves the corrosion resistance; Stainless steel vacuum pump can meet higher requirements for corrosion resistance.
5. Special flexible outlet design ensures no over-compressing and firm performance under design conditions
More...