Material:aluminum 6061-T6

Finish :polish

No burr and sharp edge . Great chamfer . More...

Sucker rod (API 11B)
Polished rod, sinker bars, pony rods, hollow sucker rod,coupling
Specs: 5/8, 3/4,7/8,1
Length: 7.62 ,8.0,8.5,9.14
Grade: K, D, KD More...

Precious Clad Metal is a kind of new functional composite material. It is basedon the copper or copper alloy.Precious metal,silver or silver alloy are cladded on the base metal as an inlay or overlay through special bonding process.

Precious Clad Metal is a new technical material, based on different industry needs,formed by advanced indoor temperature composite technology or Hot CompositeTechnique;It is rolled with different characteristic material stripscomposite alloy material and base material strip.Their alloy and base material characteristic are well preserved, and their compound characteristic are very good,esp.its electrical character and its wearability are much better than single precious metal contact material (such as gold and silver). Beside,it is a saving ofprecious metal, keeping low cost and consistency of social development.

Its characteristics as follows:

offer flexibility of material design; being able to produce the electrical contact with high mechanical and electrical contact characteristics

② save precious metal materials with low prices, as precious metal is only used at electrical contact spots.

③ Precious Clad Metal Material is suitable for continuous automatically manufacture.It does not need other manufacture process,such as welding or solderingafter its formation.It simplifies manufacturing process of electrical parts with high productivity and low cost and raises the assembly precision credibilityof electrical component.

Precious Clad Metal is used for all sorts of electrical component production, such as, micro motors,electrical brush, commutator,jiggle plug/socket,relay,connector,tuner,etc.

Precious Clad Metal production line has Germany Hi-precision Roller Machine; Hi-precision Vertical Cutting Machine; Slotting Machine; Ionic Absorption Test System AAS; Light Processor & Metallographic Microscope; Digital Light Processor;Strength Tester; Hardness Tester and other 220 production and testing equipments.As clients requirement, we can make different foils, annual output 300 tons. More...

Silver Contact Wire which is used to make Electrical Contact,mainly include AgFkAgAgNiAgCuAgSnO2、AgSnO2In2O3、AgZnO2、AgCdO etc.

Their characteristics as follows:

(1)Adopting the manufacturing methods of sintering and extrusion, their density can achieve up to 99.9%. Meanwhile the second structure in silver base becomes fibers shape,which direction is vertical to the surface of Electrical Contacts,all these characters improve highly physical mechanism and arc corrosion resistance functions of the materials.

(2)Adding micro-elements to AgNi、AgCu、AgSnO2、AgSnO2In2O3、AgZnO2、AgCdO wires can take effects of dispersion and aggrandizement, improve mechanism strengthen, ameliorate fusion, arc corrosion and electricity abrasion resistance of materials.

(3)Adopting chemical cladding, co-deposition, mechanic alloy and oxidized methods. It makes material micro crystal, uniformity, non extraction, non oxide vacancy, with superior quality contact wire.

Silver Alloy Wire can be used to manufacture Rivet Contacts and Contact Bridges by Automatic welding Machine. They are widely applied in low voltage electrical appliances, such as Contactor、Relay、Starter、Voltage Controller、Automobile etc.

All contact wires manufactured by our Company accords with RoHS Regulations.

The equipments for manufacturing contact wire include 800 ton Extrusion Machine, 500 ton Oil Pressure Machine, Oxide Anneal Furnace, High equality Pressure Machine, Ionic Contamination Test System AAS/WF10, Color Microscope From Japan, 3D Image Apparatus, Atom Spectral Analysis, Photometer, Pull and Hardness Test Machine. We can develop and manufacture them according to customers’ specific requirements and the output can surpass 260 tons annually.


The Dimension, Allowed Tolerance and Average Roundness of Contact Wire for Rivets




Contact wire material specification and mechanical physical characteristics More...

Tri-metal Contact has contact surface materials as Silver, Fine Silver, AgNi, AgInSnO2, AgCu, AgZnO, AgCdO, etc. Its base material as CuNi, Fe, FAg/Cu/Fe, AgNi/Cu/Fe, AgSnO2/Cu/Fe, AgCdO/Cu/Fe, etc.

Its characteristic as follows:

(a) Tri-metal contact has a contact surface as Fe material, with small convexesto increase welding. It helps the welding stability of contact with bi metal sheet and stainless steel sheet base materials etc.

(b) Welding position is bonded by melting metals. Its electrical stability is much better than riveting contact with its perfect image and position. If riveting, may commonly distort bi metal in too tight welding, and may increase electricity resistance in too loose welding. Later it influences temperature meter with data deviation.

(c) By comparison with Welding Contact, it has short heat time and clean environment. It is available for mini part producing, especially for mini system.

Tri-metal Contact may select different silver alloy metal by different electricity currency in appliance. It is available for contact bridge conjunction by electricity pulse welding. It is used widely for contact parts making and bi metal bridge, such as relay, mini-switch, thermal controller, button and circuit breaker.

Tri-metal Contact product line composes roller automaton, extruder machine, welding machine, auto stamper, sheet contact machine, hydraulic pressure machine, metallographic microscope, hardness tester, projector, microscope etc. about 100 testing machine. It can make contact product per customer design with annual output 2 billion pieces capacity. More...

Contact Rivet are made by Cold Pressure Welding Machine, Main products include:

Bi-metal Electrical Contacts:Ag/Cu, FAg/Cu, AgNi/Cu, AgSnO2/Cu, AgSnO2In2O3/Cu, AgCu/Cu, AgZnO/Cu, AgCdO/Cu, etc.

Tri-metal Electrical Contacts: Ag/Cu/Ag, FAg/Cu/FAg, AgNi/Cu/AgNi, AgSnO2/Cu/AgSnO2, AgSnO2In2O3/Cu/AgSnO2In2O3, AgZnO/Cu/ AgZnO, AgCdO/Cu/ AgCdO.

Contact rivets characteristics, as follows:

(1)There are two kinds of composite methods in Contact Rivet: head layer, and both head and foot layer. Composite layer can use AgAuPdPt and its alloy materials;base material generally chooses pure copper which has better formation and electricity conductivity.precious metal materials are only compounded atessential contact position of Electrical Contacts so that they can economize precious metal,reduce the cost of Electrical Contacts and benefits the development of society.

(2)It is much easier to choose layer alloy material than monometal contact rivet.Although precious metal alloy materials has excellent electrical contact function, they are not durable than composite rivets contacts in use.

(3)Composite Contact Rivet apply to continuous automatically production.After riveting,they dont need other manufacturing technical methods(such as electroplating,welding etc).This method not only simplifies contact manufacturing,improves efficiency and reduces cost,but also strengthens the assembling accuracy and credibility of component.

Composite Rivet Contact is mainly used in Automobile,Home Electrical Appliance,Relay,Contactor,Thermal Controller,Timer Electronics and Electrical Appliance.

The manufacturing and test equipments which is total amount more 200 sets for making Contact Rivet include Tri-metal rivet machine from Germany,Bi-compoundedrivet machine,Colored Microscope, 3D coordinator Apparatus,Hardness Test Machine,etc.We can develop and manufacture them according to customersspecific requirement,and the output can surpass one billion pieces annually. More...

material: aluminume
H: 19.5cm
top dia:20cm
thickness:1 mm
mirror polish outside, sand posish inside More...

Aluminium Sheet (Coil)
1) Alloy: 1050,1100,3003,8011
2) Temper: 0,H12,H14,H16,H18,H22,H24,H26
3) Thickness(mm): 0.3~3.0
4) Width(mm):100~1500
5) Length(mm): 500~10000
6) Dimensions can be produced according to client's specifications
7) Good plasticity, conductivity
8) Generally used in industry and architecture industries
Packing: Export Standard Packing
Quantity: 20-22 tons per 20' container
Shipment: within 10 days after receipt of your remittance
Payment: 40% T/T in advance, another 60% payment against Irrevocable L/C at sight More...

Aluminium foil for bottle cap use :
Alloy: 8011
Temper: H12, H14,H 16
Thickness: 0.18mm-0.22mm
Coated all kinds of colors
Packing: Export Wooden Boxes Packing: 250 kgs ~ 500 kgs per boxes
Minimum Order: 20 tons
Delivery Time: within 15 days after receipt of your remittance
Payment: 30% T/T in advance, 70% balance payment against Irrevocable L/C at sight More...

Aluminium Strip
1)Alloy :1050,1100,2315,8011A
2)Temper:0,H12,H14,H16,H18,H22,H24,H26
3)Thickness:0.20~2.5mm
4)Width:60~1.450mm
5)Inside Diameter:510mm,300mm,200mm
6)Dimensions can be produced according to clients' specifications
7)Good plasticity,conductivity
8)Generally used in industrial and construction applications
Packing:Export Standard Packing
Shipment :within 15 days after receipt of your remittance
Payment:40%T/T in advance,another 60% payment against Irrevocable L/C at sight More...

Aluminum Foil For Pharmacy Foil
Alloy/Temper: 8011 3003 8021 1235 1145 /O H18 H24
Thickness: >=20micron
Thickness tolerance: +/-8%
Width: 250mm --1.2m
Width tolerance: +/- 1mm
Surface finish: Bright/Dull
Reel outside diameter: 370 to 650mm
Reel inside diameter: 76mm/150mm
Core: Aluminum/steel cubeNumber of joins/reel: Maximum 2
Distance between two joins: Minimum 2000m
Joins indication: Foil flag one side on the reel
Tensile strength: 50-115Mpa
Elongation a 100%: Minimum 3
Porosity (Pinholes): Max. 8/SQ. Meter
Payment terms: Irrevocable confirmed L/C payable at sight.
Packing: Strong seaworthy wooden case for containerized vessel shipment (containing sufficient quantity of silica gel bags for dehumidifying More...

1.Aluminium foil for air-c20micron
Thickness tolerance: +/-8%
Width: 250mm --1.2m
Width tolerance: +/- 1mm
Surface finish: Bright/Dull
Reel outside diameter: 370 to 650mm
Reel inside diameter: 76mm/150mm
Core: Aluminum/steel cubeNumber of joins/reel: Maximum 2
Distance between two joins: Minimum 2000m
Joins indication: Foil flag one side on the reel
Tensile strength: 50-115Mpa
Elongation a 100%: Minimum 3
Porosity (Pinholes): Max. 8/SQ. Meter
Payment terms: Irrevocable confirmed L/C payable at sight.
Packing: Strong seaworthy wooden case for containerized vessel shipment (containing sufficient quantity of silica gel bags for dehumidifying
5.Aluminium Foil For Aluminum Foil Container
Alloy: 8011 3003 8006
Temper: H22, H24
Thickness: 0.04mm ~ 0.09mm
Width: 200mm ~ 1000mm
Terms of Payment: L/C,T/T
Supply Ability: 3000 Ton per Month
Minimum Order: 20 Ton
Packaging: Export Standard Packing
Delivery Lead Time: 15 days after the L/C present at the seller's bank
6.Aluminium Foil For Food Packing
Alloy: 8011, 8006, 3003;
Temper: O, H22, H24, H26;
Width: 200-1400mm;
Thickness: 0.009-0.023mm;
Inside Diameter: 76, 152mm
Outside Diameter: 300-700mm
Packing: Export Standard Packing
Minimum Order: 20 tons
Delivery Time: within 15 days after receipt of your remittance
Payment: 30% T/T in advance, 70% balance payment against Irrevocable L/C at sight More...

Milk mixer’s motor detail data:
voltage 220V
cycle :60Hz
watt: 36W
AMPS: 0.17A
R.P.M. : 1700
pc/inner box 2pcs/ctn More...

Die castings,casting part,zinc alloy products
Features:
1)Material:Zinc alloy
2)Forming Mode:Die casting
3)Color:Golden,Nickel,Tan
4)Shape:As per customers' requirements
5)MOQ:5000PCS
6)Packing:Polybag More...

aluminium foil and sheet for pilper proof cap use
alloy 8011 h14 h16
thickness from 0.18mm~0.25mm
hot rolling quality .
width according to the client requriement
packing : wooden boxes packing about 500kg and 250kg per boxes
skype gaoqingliujian More...